Description

PRODUCT VIDEO

OVERVIEW

1. The equipment control adopts a reliable PLC control system, equipped with an electronic cam control panel and a human-computer interaction interface.

2. Achieve precise control of the equipment. The operation modes include inching, single, continuous, mold change and stop, with a total of five levels.

3. Supports series connection of automated equipment, programmable process parameters, and calls corresponding programs according to different parts produced.

4. When the equipment monitoring sends out a protection signal, the relevant information will be displayed directly on the screen to facilitate quick identification and processing by maintenance personnel; the human-machine interface has built-in electrical diagrams and maintenance schematics to help maintenance personnel quickly grasp it.

PARAMETERS

VFP-600/2500T Series (Primary drive)	Unit	Model
VFP-600/2500T Series (Primary drive)	Unit	VFP-600	VFP-800	VFP-1000	VFP-1300	VFP-1600	VFP-2000	VFP-2500
Press Tonnage Capacity	Tons	600	800	1000	1300	1600	2000	2500
Slide Stroke	mn	175	200	250	250	300	300	300
Slide Adjustment	mm	10	10	10	12	15	15	15
Number of Stroke	spm	100	95	85	85	80	60	75
Number of Effective Working Stroke	spm	18	18	16	16	16	16	16
Maximum Height of Die Assembly	mm	555	695	755	845	915	915	915
Nominal Pressure Occurrence Point	mm	5	5	5	5	6	7	7
Area of Bottom of Slider	mm	755*640	780*700	920*800	980*860	1100*1000	1110*1200	1350*1100
Area of Table Panel	mm	950*770	1010*900	1120*980	1190*1050	1340*1100	1300*1300	1540*1200
Main Motor	kW*p	37*8	45*8	55*8	90*8	110*8	160*8	185*8

VFP-600/4000G Series (Secondary Drive)	Unit	Model
VFP-600/4000G Series (Secondary Drive)	Unit	VFP-600G	VFP-800G	VFP-1000G	VFP-1300G	VFP-1600G	VFP-2000G	VFP-2500G	VFP-3150G	VFP-4000G
Press Tonnage Capacity	Tons	600	800	1000	1300	1600	2000	2500	3150	4000
Slide Stroke	mm	175	200	250	250	300	300	350	350	350
Slide Adjustment	mm	10	10	10	15	15	15	15	15	15
Number of Stroke	spm	65	60	60	60	55	55	55	55	55
Maximum Height of Die Assembly	mm	555	695	755	845	915	1000	1050	1100	1150
Area of Bottom of Slider	mm	755*640	780*700	920*800	980*860	1100**1000	1250*1100	1350*1100	1350*1200	1500*1390
Area of Table Panel	mm	950*770	1010*900	1120*980	1190*1050	1340*1100	1440*1200	1540*1200	1600*1500	1600*1600
Main Motor	kW"p	45*6	55*6	75*6	90*6	132*6	160*6	185*6	200*6	250*6

ADVANTAGES

Frame

1. The steel plate on the top of the frame is reinforced to improve rigidity, reduce deformation, and facilitate installation and maintenance.

2. The deflection of the work table is designed to exceed 1/12000, which improves forging accuracy and mold life.

3. The frame has been annealed to enhance stability.

DRIVE

1. The crankshaft raw material uses high-performance alloy steel 42CrMo. The yield limit is 2.6 times that of 45# steel. After heat treatment, the hardness HB reaches more than 300. The crankshaft diameter is increased, which is more than 20% heavier than the MP model, and the stress is increased by more than 35%.

2. The flywheel has been enlarged to provide the equipment with greater energy reserve.

3. The clutch adopts a multi-set friction disc structure design, which has greater friction torque than the general friction block structure design, allowing the equipment to have greater working capacity.

CONNECTING

The double-link structure design significantly improves the eccentric load bearing capacity. The slider adopts a box-shaped cast steel structure and is equipped with an extended eight-sided guide rail to ensure high-precision maintenance performance and the ability to withstand high eccentric loads. The guide plate is made of highly wear-resistant materials, allowing the equipment to have a full load capacity of 80%-100% at each station.

EJECTOR

The upper and lower ejection devices can reduce the die-out angle of the die forgings to less than 2 degrees, saving 10%-15% of materials and facilitating the realization of automation.

SHOWCASE

Hot die forging presses are widely used in die forging production in automobile industry, agricultural machinery, bearing industry, valves, hardware tools, petroleum industry, engineering machinery and defence industry. It can complete the die forging forming process of blade, ramrod, gear, valve, spanner, bulldozer chain plate, connecting rod and other parts.

Hot Tags: Hot Die Forging Press Machine, China Hot Die Forging Press Machine manufacturers, suppliers, factory, For Pressing, CWR Machine for Wrench Manufacturing, Preforming Reduce Roller Machine, Construction Industry Roll Forging Machine, Metal Hot Forging Roller Machine, Hot Cold Forging Wedge Rolling Machine